TAKENAKA Power Unit IP1F

Deskripsi

Spesifikasi TAKENAKA Power Unit IP1F

Brand : TAKENAKA
Type : Power supply unit for sensors 
Model : IP1F
Operation mode : Timer function selectable Revers
Output mode : Relay Voltage
Timer feature : Provided

Rating/Performance/Specification

• Power supply : 100VAC・110 / 200V・220V ±10% 50 / 60Hz
• Power consumption : 5 VA or less
• Operation mode : ON-OFF
• Output mode :
  Relay output 1c Rating : 5A (250VAC) or less resistive load
  Voltage output Rating : Output impedance 1 KΩ (12VDC)
  Power supplied to sensor : 12VDC ±5% 100mA or less (150 mA or less for IMP1F)
  External gating : Contact input/voltage input [H: 6V or more., L: 1V or less]
• Response time :
  Sensor input: Relay output 25 ms or less
  Voltage output 0.5 ms or less
  External gating input: Voltage output 5 ms or less
• Indicator :
  P.L. : Power indicator (green LED)
  OP.L : Operation indicator (red LED)
• Volume (VR) :
  TIME: Delay time adjustment provided (0.1 – 10s variable)
• Switch (SW) :
  Operation mode selector switch ON.D: On delay
  OF.D: Off delay
  OST: One shot
  Input operation reverse switch:
  INVERTING : Input reversed
  NORMAL : Same as input
  Timer enabled/disabled switch
  TIMER : Timer enabled
  NORMAL : Timer disabled
• Material : Polycarbonate
• Connection : Plug in terminal block (3.5 mm screws)
• Weight : Approx. 400 g
• Accessories : Operation manual, screws for mounting, terminal block

Environmental Specification

• Ambient temperature : -10 – +50 ℃ (non-freezing)
• Ambient humidity : 35-85%RH (non-condensing)
• Protective structure : IP20
• Vibration : 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
• Shock : 100 m/s2 / 2 times each in 3 directions
• Dielectric withstanding : 1,500 VAC for 1 minute
• Insulation resistance : 500 VDC, 20 MΩ or higher