HITEC CP5220 Level Transmitter

Description

Spesifikasi HITEC CP5250 Level Transmitter

• Merk : HITEC
• Model : BDTW2x1
• Cable Length : 10 M +

General Features :

Water level measurement, control and process for tanks and water towers.

Technical Principle :

The level measurement is performed through the differential pressure measurement between liquid surface and the submersible sensor. The pressure is converted into electric signal by piezo-electric gauge to provide a 4/20mA output signal on 2 wires.

Mechanical Specifications :

Housing : Stainless steel 316L, PVC tip
Cable : 2 wires + internal tube in shielded PVC (food approval) cable
Sensor : piezo-resistive gauge with silicone coating.
Diameter : 31 mm
Height : 150 mm (without cable)
Weight : 435 g (without cable) Supplied normally with 10 meters
of shielded cable (475 g) or more upon request
Fitting : by the suspension cable supplied with a hanging system KITCAB.

Electrical Specification :

Output signal : 4/20mA output signal on 2 loop wires, 4mA for 0m and 20mA for the full-scale
Power supply : Voltage supply between 6 to 38 volts DC input. (Don’t forget to integrate the voltage dropout in the current loop) Check the voltage specification of the protector unit
EMC Conformity : EN 50 081-2, EN 50 082-2
Consumption : the signal value (mA)

Technical Data :

Water column range : Full-scale (F.S.) between 0,5 m to 30m. (Full-scale 20mA adjusted to the required value by Hitec)
Equivalent pressure : 0,05 to 3 bars. P(bars) = H(meters) / 10.197
Hysteresis : 0,10 % F.S. (constant temperature).
Non-linearity : 0,15 % F.S. (constant temperature).
Temperature operating range : from 2ÄC to 50Ä Celsius