Spesifikasi HITEC CP5250 Pressure Transmitter
- Merk : HITEC
- Model : BDTW2x1
- Cable Length : 2 M
General Features :
Measurement, control and process of hydraulic or pneumatic pressure on pipe
Technical Principle :
The pressure measurement is performed through the differential pressure
between atmospheric pressure and liquid pressure. The pressure is converted
into electric signal by piezo-electric gauge to provide a 4/20mA output signal
on 2 wires
Mechanical Specifications :
Housing : nickelled brass (high degree phosphorus), PVC tip, waterproof under 3m water
Pressure : connector Stainless steel 316L G 3/8“ BSPC, tighten with 24mm wrench
Cable : 2 wires + internal tube in shielded PVC (food approval) cable
Sensor : piezo-resistive gauge with silicone coating.
Diameter : tube 24 mm, overall 27,5mm
Height : 155 mm (without cable)
Weight : 260 g (without cable) Supplied normally with 2 meters
of shielded cable (100 g) or more upon request
Electrical Specifications :
Output signal : 4/20mA output signal on 2 loop wires, 4mA for 0m and 20mA for the full-scale
Power supply : Voltage supply between 6 to 38 volts DC input. (Don’t forget to integrate the voltage drop-out in the current loop) Check the voltage specification of the protector unit
EMC Conformity : EN 50 081-2, EN 50 082-2
Consumption : the signal value (mA)
Technical Data :
Pressure range : Full-scale (F.S.) between 50 mbar (min.) to 40 bars (max.) (Full-scale 20mA adjusted to the required value by Hitec)
Standard range : 1 bar, 2 bars, 4 bars, 6 bars, 10 bars, 12, 16 and 25 bars.
Equivalent water height : F.S. from 0.5 to 400 meters. H(meters) = P(bars) x 10.197
Hysteresis : 0,10 % F.S. (constant temperature).
Non-linearity : 0,15 % F.S. (constant temperature).
Temperature operating range : from 2ÅC to 50Å Celsius